Milling fence GTS 10 XC | Assembly instructions (GERMAN)

This milling fence is something else. Literally! The special feature lies in the connection to the parallel fence of the GTS 10 XC. No screws or handles protrude on the other side of the parallel fence, meaning the router fence does not need to be removed and reattached if the table saw is to be used. The mounting to the parallel fence is done with ordinary dowels, which are tightened until the fence hangs firmly on the table saw. Additionally, no space is wasted in the stop itself. The front half has a small drawer where the most important router bits can be stored and are always within easy reach. The drawer front is also equipped with magnets so that the drawer closes automatically. The adjustable stops allow for high precision during milling, and when reversed, they also function as stoppers. Ideal for milling operations that don't extend across the entire length of the workpiece. A 50mm hole for dust extraction is located at the rear end of the router fence. This allows the dust extraction hose to be connected together with the hose of the table saw. A materials list is included in the instructions, along with relevant links. Required wooden panels are 18mm multiplex and 18mm screen printing plate.